T1170W-5 Axis Drilling and Threading Machining Center

T1170W(Mitsubishi M80B System + BT30-120 Direct Link Spindle + Servo Tool Changer Type 21T)

Technical Parameters

Model Number	model	unit (Measurement)（unit)
Distance traveled/Travel
Moving on the X-axis	X-axis travel	mm	1100
Moving on the Y-axis	Y-axis travel	mm	700
Moving on the Z axis	Z-axis travel	mm	700
Spindle to A-axis distance	Distance from spindle to A-axis	mm	230-930
Расстояние от центра шпинделя до оси A	Distance from spindle center to A-axis	mm	(-340)-(+360)
Maximum Workpiece Diameter	Max workpiece rotation diameter	mm	Φ1300
Размер обрабатываемой заготовки (ДШГ) (включая приспособления)	Machinable workpiece size (LWH)(Including fixtures)	mm	1000600200/640640200
Worktable/Worktable
5-axis table size	Worktable size（L×W）	mm	Φ340
Maximum load capacity	Maximum load	kg	300
T-slot	T-slot	mm	4-12-90°
Main Axis (In Mechanics, Optics, botany, etc.)/Spindle
Spindle speed	Spindle Speed	.rpm	12000
Spindle power	Spindle motor power	KW	7.5
Tapered spindle bore	Spindle taper hole		BT40-φ140
Spindle collets	Spindle collet chuck		C32
Attenuation Method	Unlock tool way		mechanical
Tool changer with clamping arm/Tool magazine
Tool magazine capacity	Tool magazine Capacity	T	21
Maximum Tool Length	Max tool length	mm	150
Maximum Tool Diameter	Maximum tool diameter	mm	60/80
Maximum Tool Weight	Maximum tool weight	Kg	3
Tool change time	Tool change time	Sec	0.3~1.2
Feed Rate/Federate
Express movement on the X/Y/Z axes	Ted X/Y/Z axis express displacement	mm/min	36000
Cutting Feed Rate	Cutting feed rate	mm/min	12000
Accuracy
Position Accuracy	Pointing accuracy	mm	±0.003/300
Repositioning Accuracy	Repeat ability accuracy	mm	±0.002/300
Machine information
Machine Dimensions	Machine dimension (L×W×H)	mm	3300×3300×3100
Machine Weight	Machine weight	kg	6300
Electricity Demand (Power/Current)	Power requirement	KVA	20

※As we are constantly improving our products, We reserve the right to change the design, specifications and configuration at any time without notice.

You are welcome, Check for changes in specifications, When you visit us!

T1170W(Mitsubishi M80B System + BT30-120 Direct Link Spindle + Servo Tool Changer Type 21T)

Опциональная конфигурация модели (for an additional fee)

порядковый номер	Accessory Name	Product Model	quantity	Comments
1	̈Must be equipped 5 Axes (turbine worm)	Housing Motor FAR210 + drive	1 set
2	̈Must be equipped 5 Axes (turbine worm)	Housing FHR255 Motor + drive	1 set
3	̈Must be equipped 5 Axes (turbine worm)	Housing FHR320 Motor + drive	1 set
4	̈Must be equipped with five axles (harmonic gears)	Housing JS210 Motor + drive	1 set
5	̈Must be equipped with five axles (harmonic gears)	Housing JS255 Motor + drive	1 set
6	̈Four-axis (corps) Optional	AR210 Enclosure, drive + motor	1 set
7	̈ Four-axis (body + Disc tailstock) Should be optional	AR210 Body, drive + motor, disc tailstock RTA210, Block L, bridge	1 set
8	̈ Should choose a four-axis (body + central tailstock)	AR210 Enclosure, drive + motor, TJ210 center tailstock, Chuck flange	1 set
9	̈Four-axis (corps) Optional	HR255 Housing, drive + motor	1 set
10	̈ Four-axis (body + Disc tailstock) Should be optional	HR255 Body, drive + motor, disc tailstock RTH255, Block L, Bridge Plate	1 set
11	̈ Should choose a four-axis (body + central tailstock)	HR255 Housing, drive + engine, TJ210 center tailstock, Chuck flange	1 set
12	̈Flat nose pliers are optional	6 Inches	1 state
13	̈Should choose a refractometer	Portable 0-60	1 state
14	̈ The key for the locking knife should be optional	Locking Knife Wrench ER25	1 handful
15	̈ Tool holder for locking should be selected	BT30 with clamp lock for tool holder	1 state
16	̈ Precision cutting head should be selected	BT30-ER25-70mm(with card compartments)	1 state
17	̈ Precision spring clamp should be chosen	ER25 4/6/8/10/12	Along 1
18	̈ U-shaped disk should be optional		1 state
19	̈ Combination plate should be optional	M12 Composite Board	1 set
20	̈Chain chip conveyor should be optional		1 set