Jūtuo Intellect
V550U(Syntec 220MA + Direct Drive Spindle BT40 + handle type tool magazine on 24 Position)
Technical Parameters
| Model Number | model | unit (Measurement)/（unit） | ||
| Distance traveled/Travel | ||||
| Moving on the X-axis | X-axis travel | mm | 700 | |
| Moving on the Y-axis | Y-axis travel | mm | 600 | |
| Moving on the Z axis | Z-axis travel | mm | 500 | |
| Distance from the end of the spindle to the surface of the disk when the surface of the disk is horizontal | Distance from spindle end to disk surface when disk surface is horizontal | mm | 50-650 | |
| Максимальное расстояние от оси шпинделя до поверхности стола при вертикальном положении диска | Maximum distance from the spindle axis to the table surface when the disk is vertical | mm | 500（прогнозы） | |
| Максимальный диаметр заготовки | Maximum workpiece diameter | mm | Φ590 | |
| Maximum workpiece height | Maximum workpiece height | mm | 500(Including lights) | |
| 5-Axial Turntable/Worktable | ||||
| Workbench Disc Size | Worktable size | mm | Φ350 | |
| Maximum load capacity | Maximum load | kg | 100 | |
| T-slot | T-slot | mm | 4-12-90° | |
| Disc run-out | mm | 0.01 | ||
| Radial run-out of the disc surface (physics) | mm | 0.015 | ||
| Shaft category | tilt axis | axis of rotation | ||
| Rated Torque | Nm | 557 | 253 | |
| Maximum torque | Nm | 1300 | 748 | |
| Rated current | A | 13 | 17.5 | |
| Peak current | A | 38 | 63 | |
| Rated Speed | Rpm | 60 | 200 | |
| Top Speed | Rpm | 60 | 200 | |
| Nominal voltage | V | 220 | 220 | |
| Nominal capacity | Kw | 3.5 | 5.3 | |
| Maximum power | Kw | 5.45 | 10.2 | |
| Brake clamping torque | Nm | ≥2800 | ≥500 | |
| Air pressure to release the brake | MPa | 0.5-0.55 | 0.5-0.55 | |
| Encoder | Biss-C | 26bit | 26bit | |
| Rotation angle | ° | ±110° | Any Angle | |
| Cooling Method | water cooling | Natural cooling | ||
| Positioning Accuracy | arcsec | ±10 | ±10 | |
| Repositioning Accuracy | arcsec | ±2 | ±2 | |
| Main Axis (In Mechanics, Optics, botany, etc.)/Spindle | ||||
| Spindle speed | Spindle Speed | .rpm | 12000 | |
| Spindle power | Spindle motor power | KW | 11 | |
| Tapered spindle bore | Spindle taper hole | BT40 | ||
| Spindle Bushing Outer Diameter | Outside diameter of spindle sleeve | mm | Φ150 | |
| Spindle collet | Spindle collet chuck | C32 | ||
| Method of Attenuation | Unlock tool way | Pressurized Pneumatic Knife Cylinder | ||
| Tool changer with clamping arm/Tool magazine | ||||
| Tool magazine capacity | Tool magazine Capacity | T | 24 | |
| Feed Rate /Federate | ||||
| Express movement on the X/Y/Z axes | Ted X/Y/Z axis express displacement | mm/min | 36000 | |
| Cutting Feed Rate | Cutting feed rate | mm/min | 12000 | |
| Accuracy | ||||
| Position Accuracy | Pointing accuracy | mm | 0.01 | |
| Repositioning Accuracy | Repeat ability accuracy | mm | 0.005 | |
| Machine information | ||||
| Machine Dimensions | Machine dimension (L×W×H) | mm | 3600*2800*3000 | |
| Machine Weight | Machine weight | kg | 7000 | |
| Electricity Demand (Power/Current) | Power requirement | KVA | 45 | |
※As we are constantly improving our products, We reserve the right to change the design, specifications and configuration at any time without notice.
You are welcome, Check for changes in specifications, When you visit us!
