JNC-1814ZL-Gantry Machining Center

JNC-1814ZL (Mitsubishi M80B System + BT40 direct connection spindle + 24T Tool Magazine with Linkage)

Technical Parameters

Model Number	model	unit (Measurement)（unit)
Distance traveled
Moving on the X-axis	X-axis travel	mm	1800
Moving on the Y-axis	Y-axis travel	mm	1400
Moving on the Z axis	Z-axis travel	mm	550
Distance from the middle of the inner side of the two columns	Gantry width （inside)	mm	1400
Distance from spindle face to table surface	Distance from guide plane to spindle center	mm	100-650
Worktable/Worktable
Table size	Worktable size	mm	1800×1200
T-slot	T-slot	mm	7-18-180
Maximum load capacity	Maximum load	kg	2000
Main Axis (In Mechanics, Optics, botany, etc.)/Spindle
Spindle speed	Spindle Speed	.rpm	12000
Spindle power	Spindle motor power	KW	11
Tapered spindle bore	Spindle taper hole		BT40-φ150
Spindle collets	Spindle collet chuck		C32
Attenuation Method	Unlock tool way		Pressurized Pneumatic Knife Cylinder
Tool changer with clamping arm/Tool magazine
Tool magazine capacity	Tool magazine Capacity	T	24
Feed Rate/Federate
Express movement on the X/Y/Z axes	Ted X/Y/Z axis express displacement	mm/min	12000
Cutting Feed Rate	Cutting feed rate	mm/min	8000
Accuracy
Position Accuracy	Pointing accuracy	mm	±0.005/300
Repositioning Accuracy	Repeat ability accuracy	mm	±0.003/300
Machine information
Machine Dimensions	Machine dimension (L×W×H)	mm	510035003500
Machine Weight	Machine weight	kg	14500
Electricity Demand (Power/Current)	Power requirement	KVA	25

※ We reserve the right to change the design, specifications and configuration at any time without prior notice due to continuous product improvement.

You are welcome, Check, whether the technical characteristics have changed, When you visit us!

Опциональная конфигурация модели (for an additional fee)

порядковый номер	Accessory Name	Product Model	quantity	Comments
1	̈Four-axis (corps) Optional	HR320 Housing, drive + motor	1 set
2	̈ Four-axis (body + Disc tailstock) Should be optional	HR320 Housing, drive + motor, disc tailstock RTH320, Block L, bridge	1 set
3	̈ Should choose a four-axis (body + central tailstock)	HR320 Housing, drive + engine, TJ320 center tailstock, Chuck flange	1 set
4	̈Flat nose pliers are optional	6 Inches	1 state
5	̈Manual refractometer should be optional	0-60	1 state
6	̈ The key for the locking knife should be optional	C32 Special Key	1 handful
7	̈ Tool holder for locking should be selected	BT40(with the bay)	1 state
8	̈ Precision cutting head should be selected	BT40-C32-105mm(with the bay)	1 state
9	̈ Precision spring clamp should be chosen	S32 4/6/8/10/12/16	Along 1
10	̈ Combination plate should be optional	M16 Composite Board	1 set
11	̈ Must be equipped with an internal six-key key		1 set
12	̈ Select 10, Slotted screwdriver		along 1 Handfuls