JNC-2216ZL-Gantry Machining Center

JNC-2216ZL (Mitsubishi M80B System + BT50 Direct Connect Spindle + 24T Tool Magazine with Linkage) Technical Parameters

Model Number	model	unit (Measurement)（unit)
Distance traveled
Moving on the X-axis	X-axis travel	mm	2200
Moving on the Y-axis	Y-axis travel	mm	1700
Moving on the Z axis	Z-axis travel	mm	670
Distance from the middle of the inner side of the two columns	Gantry width （inside)	mm	1600
Distance from spindle face to table surface	Distance from guide plane to spindle center	mm	130-800
Distance from table top to beam	Distance from table top to beam	mm	900
Worktable/Worktable
Table size	Worktable size	mm	2200X1400
T-slot	T-slot	mm	7-22-200
Maximum load capacity	Maximum load	kg	5000
Main Axis (In Mechanics, Optics, botany, etc.)/Spindle
Spindle speed	Spindle Speed	.rpm	8000
Spindle power	Spindle motor power	KW	18.5
Tapered spindle bore	Spindle taper hole		BT50-φ155
Spindle collets	Spindle collet chuck		C42
Attenuation Method	Unlock tool way		Pressurized Pneumatic Knife Cylinder
Tool changer with clamping arm/Tool magazine
Tool magazine capacity	Tool magazine Capacity	T	24
Feed Rate/Federate
Express movement on the X/Y/Z axes	Ted X/Y/Z axis express displacement	mm/min	12000
Cutting Feed Rate	Cutting feed rate	mm/min	8000
Accuracy
Position Accuracy	Pointing accuracy	mm	±0.005/300
Repositioning Accuracy	Repeat ability accuracy	mm	±0.003/300
Machine information
Machine Dimensions	Machine dimension (L×W×H)	mm	620043004200
Machine Weight	Machine weight	kg	17000
Electricity Demand (Power/Current)	Power requirement	KVA	35

※ We reserve the right to change the design, specifications and configuration at any time without prior notice due to continuous product improvement.

You are welcome, Check, whether the technical characteristics have changed, When you visit us!

Опциональная конфигурация модели (for an additional fee)

порядковый номер	Accessory Name	Product Model	quantity	Comments
1.	̈Flat nose pliers are optional	6 Inches	1 state
2.	̈Should choose a refractometer	Portable 0-60	1 state
3.	̈ The key for the locking knife should be optional	C42 Exclusive	1 handful
4.	̈ Tool holder for locking should be selected	BT50 with clamp lock for tool holder	1 state
5.	̈ Precision cutting head should be selected	BT50-C32-110(with the bay)	1 state
6.	̈ Precision spring clamp should be chosen	S42 6/8/10/12/16/20	Along 1
7.	̈ U-shaped disk should be optional		1 state
8.	̈ Combination plate should be optional	M20 Combi Cooker	1 set