MF8033C-Gantry Machining Center (lit. have two lines and one hard line，Z-axis with prismatic guide)

MF8033C (система FANUC 1 пакет + коробка передач BT50 + Z-ось с призматической направляющей)

Technical Parameters / Technical Parameters

Model Number	model	unit (Measurement)（unit)
Distance traveled
Moving on the X-axis	X-axis travel	mm	8200
Moving on the Y-axis	Y-axis travel	mm	3800
Moving on the Z axis	Z-axis travel	mm	1250
Distance from the middle of the inner side of the two columns	Gantry width （inside)	mm	3300
Distance from spindle face to table surface	Distance from guide plane to spindle center	mm	250-1500
Distance from table top to beam	Distance from table top to beam	mm	1600
Worktable/Worktable
Table size	Worktable size	mm	8000X2800
T-slot	T-slot	mm	13-28-200
Maximum load capacity	Maximum load	kg	30000
Main Axis (In Mechanics, Optics, botany, etc.)/Spindle
Spindle speed	Spindle Speed	.rpm	6000
Spindle power	Spindle motor power	KW	22
Tapered spindle bore	Spindle taper hole		BT50-φ190
Spindle collets	Spindle collet chuck		C42
Attenuation Method	Unlock tool way		Pressurized Pneumatic Knife Cylinder
Tool changer with clamping arm/Tool magazine
Tool magazine capacity	Tool magazine Capacity	T	24
Feed Rate/Federate
Express movement on the X/Y/Z axes	Ted X/Y/Z axis express displacement	mm/min	6000/8000/8000
Cutting Feed Rate	Cutting feed rate	mm/min	5000
Accuracy
Position Accuracy	Pointing accuracy	mm	±0.01/300
Repositioning Accuracy	Repeat ability accuracy	mm	±0.01/300
Machine information
Machine Dimensions	Machine dimension (L×W×H)	mm	2100066005800
Machine Weight	Machine weight	kg	71000
Electricity Demand (Power/Current)	Power requirement	KVA	40

※ As we are constantly improving our products, We reserve the right to change the design, specifications and configuration at any time without notice.

You are welcome, Check for changes in specifications, When you visit us!

Опциональная конфигурация модели (for an additional fee)

порядковый номер	Accessory Name	Product Model	quantity	Comments
1.	̈ Инструментальный магазин	BT50-30Tнож-рука	1 set
2.	̈Ручная угловая головка 90 (позиционирование без звезды) является дополнительной	БТ50-90	1 set
3.	̈Ручная головка под углом 90 (позиционирование зубчатого диска) не является обязательной	БТ50-90	1 set
4.	̈ Должен быть оснащен автоматической головкой под углом 90 (индексация 5°).	БТ50-90	1 set
5.	̈ Должен быть оснащен автоматической угловой головкой 90 (индексация 2,5°).	БТ50-90	1 set
6.	̈Flat nose pliers are optional	6 Inches	1 state
7.	̈Should choose a refractometer	Portable 0-60	1 state
8.	̈ The key for the locking knife should be optional	C42 Exclusive	1 handful
9.	̈ Tool holder for locking should be selected	BT50 with clamp lock for tool holder	1 state
10.	̈ Precision cutting head should be selected	BT50-C42-110(with the bay)	1 state
11.	̈ Precision spring clamp should be chosen	S42 6/8/10/12/16/20	Along 1
12.	̈ U-shaped disk should be optional		1 state
13.	̈ Combination plate should be optional	M24 Композитная плита	1 set