T1057L-Вертикальный сверлильный и резьбонарезной центр

T1057L (Mitsubishi M80B system + BT30 Direct Connection Spindle + Clamping arm type 21T servo tool changer)

Technical Parameters

Model Number	model	unit (Measurement)/（unit）
Distance traveled/Travel
Moving on the X-axis	X-axis travel	mm	1000
Moving on the Y-axis	Y-axis travel	mm	500
Moving on the Z axis	Z-axis travel	mm	600
Distance from spindle face to table surface	Distance from guide plane to spindle center	mm	180-780
Distance from spindle centerline to guide column	Distance from spindle center to column rail	mm	672
Worktable/Worktable
Table size	Worktable size (L×W)	mm	1200*500
Maximum load capacity	Maximum load	kg	600
T-slot	T-slot	mm	5-18-100
Main Axis (In Mechanics, Optics, botany, etc.)/Spindle
Spindle speed	Spindle Speed	.rpm	20000
Spindle power	Spindle motor power	KW	5.5
Tapered spindle bore	Spindle taper hole		ER25
Attenuation Method	Unlock tool way		Mechanical
Tool changer with clamping lever Tool magazine
Tool magazine capacity	Tool magazine Capacity	T	21
Maximum Tool Length	Max tool length	mm	150
Maximum Tool Diameter/Approximate Tool	Maximum tool diameter	mm	60/80
Maximum Tool Weight	Maximum tool weight	Kg	3
Tool change time	Tool change time	Sec	0.3~1.2
Feed Rate/Federate
Express movement on the X/Y/Z axes	Ted X/Y/Z axis express displacement	mm/min	36000/48000/48000
Cutting Feed Rate	Cutting feed rate	mm/min	12000
Accuracy
Position Accuracy	Pointing accuracy	mm	±0.003/300
Repositioning Accuracy	Repeat ability accuracy	mm	±0.002/300
Machine information
Machine Dimensions	Machine dimension (L×W×H)	mm	280027002700
Machine Weight	Machine weight	kg	4800
Electricity Demand (Power/Current)	Power requirement	KVA	15

※As we are constantly improving our products, We reserve the right to change the design, specifications and configuration at any time without notice.

You are welcome, Check for changes in specifications, When you visit us!

T1057L (Mitsubishi M80B system + BT30 spindle with direct connection + Clamping arm type 21T servo tool changer)

Дополнительные конфигурации модели (for an additional fee)

serial number	Accessory Name	Product Model	quantity	note
1	̈Equipped with 5-axis (Turbine Worm Gearbox)	FAR210 Engine Housing + drive	1 set
2	̈Equipped with 5-axis (Turbine Worm Gearbox)	FHR255 Engine Housing + drive	1 set
3	̈Equipped with 5-axis (Turbine Worm Gearbox)	FHR320 Engine Housing + drive	1 set
4	• Equipped with 5-axis (Harmonious) Transmissions	JS210 Engine Housing + drive	1 set
5	• Equipped with 5-axis (Harmonious) Transmissions	JS255 Engine Housing + drive	1 set
6	• Can be equipped with an additional four-axis device (corps)	AR210 Enclosure, drive + engine	1 set
7	- Optionally equipped with four axles (corps + Disk headstock)	AR210 Enclosure, drive + engine, Headstock RTA210, L-Block, Bridge Slab	1 set
8	• Can be equipped with a 4-axis system (corps + Upper tailstock)	AR210 Enclosure, drive + engine, tailstock TJ210, Chuck flange	1 set
9	• Can be equipped with an additional four-axis device (corps)	HR255 Housing, drive + engine	1 set
10	- Optionally equipped with four axles (corps + Disk headstock)	HR255 Housing, drive + engine, Headstock RTH255, L-Block, Bridge Slab	1 set
11	• Can be equipped with a 4-axis system (corps + Upper tailstock)	HR255 Housing, Drive + Motor, tailstock TJ210, Chuck flange	1 set
12	̈For installation of flat jaw pliers	6unit of length	1 piece
13	̈Optional Refractometer	Manual 0-60	1 piece
14	̈ Extra knife wrench	Locking knife wrench ER25	1 pen
15	Дополнительный держатель инструмента	BT30 С защелкивающимся держателем для ножей	1 piece
16	Precision Milling Heads	BT30-ER25-70mm(with the bay)	1 piece
17	Optional Precision Spring Clamps	ER25 4/6/8/10/12	1 piece
18	Optional USB Flash Drive		1 piece
19	Optional Combination Shaft	Combined Platoon M12	1 set
20	Optional chip chain conveyor		1 set