T6P-Сверлильный и резьбонарезной центр

CNC-T6P (Mitsubishi M80B System + BT30 spindle with direct connection + Type 21T servo clamping arm for tool changers)

Technical Parameters

Model Number	model	unit (Measurement)（unit)
Distance traveled/Travel
Moving on the X-axis	X-axis travel	mm	600
Moving on the Y-axis	Y-axis travel	mm	460
Moving on the Z axis	Z-axis travel	mm	320
Distance from spindle face to table surface	Distance from guide plane to spindle center	mm	180-500
Расстояние от центра шпинделя до направляющей колонны	Distance from spindle center to column rail	mm	524
Worktable/Worktable
Table size	Worktable size（L×W）	mm	700×500
T-slot	T-slot	mm	3-14-140
Maximum load capacity	Maximum load	kg	300
Main Axis (In Mechanics, Optics, botany, etc.)/Spindle
Spindle speed	Spindle Speed	.rpm	20000
Spindle power	Spindle motor power	KW	5.5
Spindle collets	Spindle collet chuck		ER25
Attenuation Method	Unlock tool way		mechanical
Tool changer with clamping arm/Tool magazine(зажимной механизм/clamp-armed)
Tool magazine capacity	Tool magazine Capacity	T	21
Maximum Tool Length	Max tool length	mm	150
Максимальный диаметр инструмента/кольцевого ножа	Maximum tool diameter	mm	60/80
Maximum Tool Weight	Maximum tool weight	Kg	3
Tool change time	Tool change time	Sec	0.3~1.2
Feed Rate/Federate
Express movement on the X/Y/Z axes	Ted X/Y/Z axis express displacement	mm/min	48000
Cutting Feed Rate	Cutting feed rate	mm/min	12000
Accuracy
Position Accuracy	Pointing accuracy	mm	±0.003/300
Repositioning Accuracy	Repeat ability accuracy	mm	±0.002/300
Machine information
Machine Dimensions	Machine dimension (L×W×H)	mm	185022002850
Machine Weight	Machine weight	kg	3200
Electricity Demand (Power/Current)	Power requirement	KVA	15

※As we are constantly improving our products, We reserve the right to change the design, specifications and configuration at any time without notice.

You are welcome, Check for changes in specifications, When you visit us!

CNC-T6P (Mitsubishi M80B System + BT30 spindle with direct connection + Type 21T servo clamping arm for tool changers)

Опциональная конфигурация модели (for an additional fee)

порядковый номер	Accessory Name	Product Model	quantity	Comments
1	̈Must be equipped 5 Axes (turbine worm)	Корпус мотор FAR125 + drive	1 set
2	̈Must be equipped 5 Axes (turbine worm)	Корпус FAR 170 motor + drive	1 set
3	̈Must be equipped with five axles (harmonic gears)	Корпус JS125L мотор + drive	1 set
4	̈Must be equipped with five axles (harmonic gears)	Корпус JS170L мотор + drive	1 set
5	̈Four-axis (corps) Optional	AR170 Enclosure, drive + motor	1 set
6	̈ Four-axis (body + Disc tailstock) Should be optional	Кузов AR170, drive + motor, дисковая задняя бабка RTA170, Block L, bridge	1 set
7	̈ Should choose a four-axis (body + central tailstock)	AR170 Enclosure, drive + motor, center tailstock TJ170, Chuck flange	1 set
8	̈Four-axis (corps) Optional	AR210 Enclosure, drive + motor	1 set
9	̈ Four-axis (body + Disc tailstock) Should be optional	AR210 Body, drive + motor, disc tailstock RTA210, Block L, bridge	1 set
10	̈ Should choose a four-axis (body + central tailstock)	AR210 Enclosure, drive + motor, TJ210 center tailstock, Chuck flange	1 set
11	̈Flat nose pliers are optional	6 Inches	1 state
12	̈Should choose a refractometer	Portable 0-60	1 state
13	̈ The key for the locking knife should be optional	Locking Knife Wrench ER25	1 handful
14	̈ Tool holder for locking should be selected	BT30 with clamp lock for tool holder	1 state
15	̈ Precision cutting head should be selected	BT30-ER25-70mm(with card compartments)	1 state
16	̈ Precision spring clamp should be chosen	ER25 4/6/8/10/12	Along 1
17	̈ U-shaped disk should be optional		1 state
18	̈ Combination plate should be optional	M12 Composite Board	1 set