T857L(Mitsubishi M80B System + BT30 Direct Connection Spindle + Type 21T servo clamping arm for tool changers)
Технические параметры/Technical Parameters
| Model Number |
model |
unit (Measurement)/（unit） |
|
| Distance traveled/Travel |
| Moving on the X-axis |
X-axis travel |
mm |
800 |
| Moving on the Y-axis |
Y-axis travel |
mm |
500 |
| Moving on the Z axis |
Z-axis travel |
mm |
600 |
| Distance from spindle face to table surface |
Distance from guide plane to spindle center |
mm |
200-800 |
| Distance from spindle centerline to guide column |
Distance from spindle center to column rail |
mm |
672 |
| Work Platforms / Worktable |
| Table size |
Worktable size (L×W) |
mm |
1000*500 |
| Maximum load capacity |
Maximum load |
kg |
500 |
| T-slot |
T-slot |
mm |
5-18-100 |
| Main Axis (In Mechanics, Optics, botany, etc.)/Spindle |
| Spindle speed |
Spindle Speed |
.rpm |
20000 |
| Spindle power |
Spindle motor power |
KW |
5.5 |
| Tapered spindle bore |
Spindle taper hole |
|
ER25 |
| Attenuation Method |
Unlock tool way |
|
Mechanical |
| Tool changer with clamping arm/Tool magazine |
| Tool magazine capacity |
Tool magazine Capacity |
T |
21 |
| Maximum Tool Length |
Max tool length |
mm |
150 |
| Maximum Tool Diameter/Approximate Tool |
Maximum tool diameter |
mm |
60/80 |
| Maximum Tool Weight |
Maximum tool weight |
Kg |
3 |
| Tool change time |
Tool change time |
Sec |
0.3~1.2 |
| Feed Rate/Federate |
| Express movement on the X/Y/Z axes |
Ted X/Y/Z axis express displacement |
mm/min |
48000 |
| Cutting Feed Rate |
Cutting feed rate |
mm/min |
12000 |
| Accuracy |
| Position Accuracy |
Pointing accuracy |
mm |
±0.003/300 |
| Repositioning Accuracy |
Repeat ability accuracy |
mm |
±0.002/300 |
| Machine information |
| Machine Dimensions |
Machine dimension (L×W×H) |
mm |
2600*2700*2700 |
| Machine Weight
|
Machine weight |
kg |
4500 |
| Electricity Demand (Power/Current) |
Power requirement |
KVA |
15 |
※As we are constantly improving our products, We reserve the right to change the design, specifications and configuration at any time without notice.
You are welcome, Check for changes in specifications, When you visit us!
T857L (Surface Grinding Machine) (Mitsubishi M80B system + BT30 direct-connect spindle + 21T type servo clamping arm for tool changer)
Technical Parameters
| Model Number |
model |
unit (Measurement)（unit) |
|
| Distance traveled/Travel |
| Moving on the X-axis |
X-axis travel |
mm |
800 |
| Moving on the Y-axis |
Y-axis travel |
mm |
550 |
| Moving on the Z axis |
Z-axis travel |
mm |
600 |
| Distance from spindle face to table surface |
Distance from guide plane to spindle center |
mm |
200-800 |
| Расстояние от центра шпинделя до направляющей колонны |
Distance from spindle center to column rail |
mm |
643 |
| Worktable/Worktable |
| Table size |
Worktable size（L×W） |
mm |
1000*500 |
| T-slot |
T-slot |
mm |
5-18-100 |
| Maximum load capacity |
Maximum load |
kg |
500 |
| Main Axis (In Mechanics, Optics, botany, etc.)/Spindle |
| Spindle speed |
Spindle Speed |
.rpm |
20000 |
| Spindle power |
Spindle motor power |
KW |
5.5 |
| Spindle collets |
Spindle collet chuck |
|
ER25 |
| Attenuation Method |
Unlock tool way |
|
mechanical |
| Tool changer with clamping arm/Tool magazine(зажимной механизм/clamp-armed) |
| Tool magazine capacity |
Tool magazine Capacity |
T |
21 |
| Maximum Tool Length |
Max tool length |
mm |
150 |
| Максимальный диаметр инструмента/кольцевого ножа |
Maximum tool diameter |
mm |
60/80 |
| Maximum Tool Weight |
Maximum tool weight |
Kg |
3 |
| Tool change time |
Tool change time |
Sec |
0.3~1.2 |
| Feed Rate/Federate |
| Express movement on the X/Y/Z axes |
Ted X/Y/Z axis express displacement |
mm/min |
48000 |
| Cutting Feed Rate |
Cutting feed rate |
mm/min |
12000 |
| Accuracy |
| Position Accuracy |
Pointing accuracy |
mm |
±0.003/300 |
| Repositioning Accuracy |
Repeat ability accuracy |
mm |
±0.002/300 |
| Machine information |
| Machine Dimensions |
Machine dimension (L×W×H) |
mm |
2800*2700*2700 |
| Machine Weight |
Machine weight |
kg |
4800 |
| Electricity Demand (Power/Current) |
Power requirement |
KVA |
15 |
※As we are constantly improving our products, We reserve the right to change the design, specifications and configuration at any time without notice.
You are welcome, Check for changes in specifications, When you visit us!
T857L (Side Machine) (Mitsubishi M80B system + BT30 Direct Connection Spindle + Type 21T servo clamping arm for tool changers)
Technical Parameters
| Model Number |
model |
unit (Measurement)（unit) |
|
| Distance traveled/Travel |
| Moving on the X-axis |
X-axis travel |
mm |
800 |
| Moving on the Y-axis |
Y-axis travel |
mm |
550 |
| Moving on the Z axis |
Z-axis travel |
mm |
600 |
| Distance from spindle face to table surface |
Distance from guide plane to spindle center |
mm |
200-800 |
| Расстояние от центра шпинделя до направляющей колонны |
Distance from spindle center to column rail |
mm |
643 |
| Maximum Workpiece Diameter |
Max workpiece rotation diameter |
mm |
Φ820 |
Размер обрабатываемой заготовки
(длина*ширина*высота) (включая приспособления) |
Machinable workpiece size
(length*Width*Height)(Including fixtures) |
mm |
650X512X140 |
| Worktable/Worktable |
| Table size |
Worktable size（L×W） |
mm |
1000*460 |
| T-slot |
T-slot |
mm |
4-18-100 |
| Maximum load capacity |
Maximum load |
kg |
500 |
| Main Axis (In Mechanics, Optics, botany, etc.)/Spindle |
| Spindle speed |
Spindle Speed |
.rpm |
20000 |
| Spindle power |
Spindle motor power |
KW |
5.5 |
| Spindle collets |
Spindle collet chuck |
|
ER25 |
| Attenuation Method |
Unlock tool way |
|
mechanical |
| Tool changer with clamping arm/Tool magazine(зажимной механизм/clamp-armed) |
| Tool magazine capacity |
Tool magazine Capacity |
T |
21 |
| Maximum Tool Length |
Max tool length |
mm |
150 |
| Максимальный диаметр инструмента/кольцевого ножа |
Maximum tool diameter |
mm |
60/80 |
| Maximum Tool Weight |
Maximum tool weight |
Kg |
3 |
| Tool change time |
Tool change time |
Sec |
0.3~1.2 |
| Feed Rate/Federate |
| Express movement on the X/Y/Z axes |
Ted X/Y/Z axis express displacement |
mm/min |
48000 |
| Cutting Feed Rate |
Cutting feed rate |
mm/min |
12000 |
| Accuracy |
| Position Accuracy |
Pointing accuracy |
mm |
±0.003/300 |
| Repositioning Accuracy |
Repeat ability accuracy |
mm |
±0.002/300 |
| Machine information |
| Machine Dimensions |
Machine dimension (L×W×H) |
mm |
2800*2700*2700 |
| Machine Weight |
Machine weight |
kg |
4800 |
| Electricity Demand (Power/Current) |
Power requirement |
KVA |
15 |
※As we are constantly improving our products, We reserve the right to change the design, specifications and configuration at any time without notice.
You are welcome, Check for changes in specifications, When you visit us!
T857L (Mitsubishi M80B system + BT30 spindle with direct connection + Tool Magazine Type 21T Clamping Lever)
Optional Model Equipment (for an additional fee)
| serial number |
Accessory Name |
Product Model |
quantity |
note |
| 1 |
̈Equipped with 5-axis (Turbine Worm Gearbox) |
FAR210 Engine Housing + drive |
1 set |
|
| 2 |
̈Equipped with 5-axis (Turbine Worm Gearbox) |
FHR255 Engine Housing + drive |
1 set |
|
| 3 |
̈Equipped with 5-axis (Turbine Worm Gearbox) |
FHR320 Engine Housing + drive |
1 set |
|
| 4 |
• Equipped with 5-axis (Harmonious) Transmissions |
JS210 Engine Housing + drive |
1 set |
|
| 5 |
• Equipped with 5-axis (Harmonious) Transmissions |
JS255 Engine Housing + drive |
1 set |
|
| 6 |
• Can be equipped with an additional four-axis device (corps) |
AR210 Enclosure, drive + engine |
1 set |
|
| 7 |
- Optionally equipped with four axles (corps + Disk headstock) |
AR210 Enclosure, drive + engine, Headstock RTA210, L-Block, Bridge Slab |
1 set |
|
| 8 |
• Can be equipped with a 4-axis system (corps + Upper tailstock) |
AR210 Enclosure, drive + engine, tailstock TJ210, Chuck flange |
1 set |
|
| 9 |
• Can be equipped with an additional four-axis device (corps) |
HR255 Housing, drive + engine |
1 set |
|
| 10 |
- Optionally equipped with four axles (corps + Disk headstock) |
HR255 Housing, drive + engine, Headstock RTH255, L-Block, Bridge Slab |
1 set |
|
| 11 |
• Can be equipped with a 4-axis system (corps + Upper tailstock) |
HR255 Housing, Drive + Motor, tailstock TJ210, Chuck flange |
1 set |
|
| 12 |
̈For installation of flat jaw pliers |
6unit of length |
1 |
|
| 13 |
̈Optional Refractometer |
Manual 0-60 |
1 |
|
| 14 |
̈ Extra knife wrench |
Locking knife wrench ER25 |
1 pen |
|
| 15 |
Дополнительный держатель инструмента |
BT30 with tool holder with chuck lock |
1 |
|
| 16 |
Precision Milling Heads |
BT30-ER25-70mm (with compartment) |
1 |
|
| 17 |
Optional Precision Spring Clamps |
ER25 4/6/8/10/12 |
1 piece |
|
| 18 |
Optional USB Flash Drive |
|
1 |
|
| 19 |
Optional Combination Shaft |
Combined Platoon M12 |
1 set |
|
| 20 |
Optional chip chain conveyor |
|
1 set |
|
Jūtuo Intellect
