Jūtuo Intellect
LW-V1165L（Система Fanuc 5-pack + шпиндель BT40 с прямым соединением + шпиндель BT40 с прямым соединением + вертикальный инструментальный магазин типа 24T + горизонтальный инструментальный магазин типа 24T）
Technical Parameters
| Model Number | model | Unit/(unit) | |
| Travel/Travel | |||
| Moving on the X-axis (Moving the turntable left/right) | X-axis travel | mm | 1100 |
| Moving along the Y1 axis (Moving the saddle back and forth) | Y1-axis travel | mm | 700 |
| Moving the Y2 axis (Horizontal spindle housing up and down) | Y2-axis travel | mm | 500 |
| Moving the Z1 axis (Vertical spindle housing up and down) | Z1-axis travel | mm | 540 |
| Moving along the Z2 axis (Moving the saddle back and forth) | Z2-axis travel | mm | 700 |
| Vertical center of spindle to horizontal spindle face | Distance from vertical spindle center to horizontal spindle end face | mm | 655 |
| Distance from the vertical end face of the spindle to the table surface | Distance from vertical spindle end face to workbench surface | mm | 150-690 |
| Distance from horizontal spindle centerline to table surface | Distance from horizontal spindle centerline toworkbench surface | mm | 50-550 |
| Distance from the horizontal end face of the spindle to the center line of the table | Distance from the end face of the horizontal spindle to the centerline of the workbench | mm | 305-1005 |
| Distance from Vertical Spindle Centerline to Column Guide | Distance from spindle center to column rail | mm | 797 |
| Worktable/Worktable | |||
| Table size | Worktable size | mm | 500×500 |
| Maximum Table Load | Worktable maximum load | kg | 700 |
| T-slot | Worktable T-slot | mm | 5-18-100 |
| Minimum Installation Angle | Minimum setting angle | Deg. | 90° |
| Accumulated segmentation accuracy | Accumulated segmentation accuracy | Sec. | 4″ |
| Repositioning Accuracy | Repeatability | Sec. | ±1″ |
| Maximum Rotation Diameter | Maximum turning diameter | mm | 1210 |
| Main Axis (In Mechanics, Optics, botany, etc.)/Spindle | |||
| Spindle speed (Vertical/Horizontal) | Spindle Speed | .rpm | 12000/12000 |
| Spindle power (Vertical/Horizontal) | Spindle motor power | KW | 7.5/7.5 |
| Spindle taper bore (Vertical/Horizontal) | Spindle taper hole | BT40-φ150/
BT40-φ140 |
|
| Spindle collet chuck (Vertical/Horizontal) | Spindle collet chuck | C32/C32 | |
| Method of Attenuation (Vertical/Horizontal) | Unlock tool way | Нож пневматического усилительного цилиндра/Нож пневматического усилительного цилиндра | |
| Tool changer with clamping lever
Tool magazine |
|||
| Vertical Tool Magazine Capacity | Tool magazine Capacity | T | 24 |
| Horizontal Tool Magazine Capacity | Tool magazine Capacity | T | 24 |
| Feed Rate/Federate | |||
| Express travel on the X/Y/Z1/Z2 axes | Ted X/Y/Z1/Z2 axis express displacement | mm/min | 36000 |
| Cutting Feed Rate | Cutting feed rate | mm/min | 12000 |
| Accuracy | |||
| Position Accuracy | Pointing accuracy | mm | ±0.003/300 |
| Repositioning Accuracy | Repeat ability accuracy | mm | ±0.002/300 |
| Machine information | |||
| Machine Dimensions | Machine dimension (L×W×H) | mm | 3300*3300*2800 |
| Machine Weight
|
Machine weight | kg | 7000 |
| Electricity Demand (Power/Current) | Power requirement | KVA | 25 |
※As we are constantly improving our products, We reserve the right to change the design, specifications and configuration at any time without notice.
You are welcome, Check for changes in specifications, When you visit us!
