VH13P-Vertical Milling Center

VH13P (Fanuc 3-pack + BT40 direct connection spindle + 24T Tool Shop)

Technical Parameters

Model Number	model	unit (Measurement)/（unit)
Distance traveled/Travel
Moving on the X-axis	X-axis travel	mm	1300
Y-axis travel	Y-axis travel	mm	700
Moving on the Z axis	Z-axis travel	mm	700
Distance from spindle face to table surface	Distance from guide plane to spindle center	mm	110-810
Distance from spindle centerline to guide column	Distance from spindle center to column rail	mm	750
Worktable/Worktable
Table size	Worktable size (L×W)	mm	1500×700
Maximum load capacity	Maximum load	kg	1000
T-slot	T-slot	mm	5-18-125
Main Axis (In Mechanics, Optics, botany, etc.)/Spindle
Spindle speed	Spindle Speed	.rpm	15000
Spindle power	Spindle motor power	KW	11
Tapered spindle bore	Spindle taper hole		BT40-φ150
Spindle collets	Spindle collet chuck		C32
Attenuation Method	Unlock tool way		Нож пневматического усилительного цилиндра
Lever/Tool magazine
Manipulator volume	Tool magazine Capacity	T	24
Feed Rate/Federate
Express movement on the X/Y/Z axes	Ted X/Y/Z axis express displacement	mm/min	30000/30000/30000
Cutting Feed Rate	Cutting feed rate	mm/min	15000
Accuracy
Position Accuracy	Pointing accuracy	mm	±0.003/300
Repositioning Accuracy	Repeat ability accuracy	mm	±0.002/300
Machine information
Machine Dimensions	Machine dimension (L×W×H)	mm	340032003200
Machine Weight	Machine weight	kg	10800
Electricity Demand (Power/Current)	Power requirement	KVA	35

※As we are constantly improving our products, We reserve the right to change the design, specifications and configuration at any time without notice.

You are welcome, Check for changes in specifications, When you visit us!

Serial number	Accessory Name	Product model	Quantity	Notes
1	̈ ̈For Five Axles (Turbine Worm Gearbox)	Engine FAR210 + drive	1 set
2	̈ Equipped with five axles (worm gear)	FHR255 Engine + drive	1 set
3	̈Optional 5 Axes (worm gearbox)	FHR320 Engine Housing + drive	1 set
4	̈Optional 5 Axes (harmonic gearbox)	JS210 Engine + drive	1 set
5	̈Optional 5-axis (harmonic gearbox)	JS255 Engine Housing + drive	1 set
6	̈Optionally can be equipped with four axes (corps)	AR210 Enclosure, drive + engine	1 set
7	- Optionally equipped with four axles (corps + Disk headstock)	AR210 Enclosure, drive + engine, Headstock RTA210, L-Block, Bridge Slab	1 set
8	̈For Four Axles (corps + Upper tailstock)	AR210 Enclosure, drive + engine, TJ210 center head, Chuck flange	1 set
9	̈For Four Axles (corps)	HR255 Housing, drive + engine	1 set
10	̈For Four Axles (corps + Disk headstock)	HR255 Housing, drive + engine, Headstock RTH255, L-Block, Bridge Slab	1 set
11	̈For Four Axles (corps + Upper tailstock)	HR255 Housing, drive + engine, headstock TJ210, Chuck flange	1 set
12	̈For Four Axles (corps)	HR320 Housing, drive + engine	1 set
13	̈For equipment 4 Axes (corps + Disk headstock)	HR320 Housing, drive + engine, Headstock RTH320, L-Block, Bridge Slab	1 set
14	̈For Four Axles (corps + Upper tailstock)	HR320 Housing, Drive + Motor, upper tailstock TJ320, Chuck flange	1 set
15	̈ ̈For flat jaws	6 Inches	1 piece
16	̈For refractometer	Manual 0-60	1 piece
17	̈For fitting with a locking tool with a wrench	C32 Special Purpose	1 pen
18	̈ Optional knife holder	BT40 with chuck	1 piece
19	̈Optional head for precision tools	BT40-C32-105 (with chuck)	1 piece
20	̈Optional Precision Spring Clamp	C32 3/4/6/8/10/12/16	1 piece
21	̈Optional USB Flash Drive		1 piece
22	̈Optional combination arm	M16 Combination Arm	1 set