VMC1170L-Vertical machining center (Two lines and one rigid)

VMC1170L (Mitsubishi M80B + belt spindle BT40 + lever tool changer 24T)

Технические параметры/Technical Parameters

Model Number	model	unit (Measurement)/（unit)
Distance traveled/Travel
Moving on the X-axis	X-axis travel	mm	1100
Moving on the Y-axis	Y-axis travel	mm	700
Moving on the Z axis	Z-axis travel	mm	700
Distance from spindle face to table surface	Distance from guide plane to spindle center	mm	130-830
Distance from spindle centerline to guide column	Distance from spindle center to column rail	mm	762
Work Platforms / Worktable
Table size	Worktable size (L×W)	mm	1200×650
Maximum load capacity	Maximum load	kg	800
T-slot	T-slot	mm	5-18-125
Main Axis (In Mechanics, Optics, botany, etc.)/Spindle
Spindle speed	Spindle Speed	.rpm	8000
Spindle power	Spindle motor power	KW	11
Tapered spindle bore	Spindle taper hole		BT40-φ150
Spindle collets	Spindle collet chuck		C32
Attenuation Method	Unlock tool way		Нож пневматического усилительного цилиндра
Tool changer type “Lever/Tool magazine
Tool magazine capacity	Tool magazine Capacity	T	24
Feed Rate/Federate
Express movement on the X/Y/Z axes	Ted X/Y/Z axis express displacement	mm/min	36000/36000/24000
Cutting Feed Rate	Cutting feed rate	mm/min	12000
Accuracy
Position Accuracy	Pointing accuracy	mm	±0.003/300
Repositioning Accuracy	Repeat ability accuracy	mm	±0.002/300
Machine information
Machine Dimensions	Machine dimension (L×W×H)	mm	320028002900
Machine Weight	Machine weight	kg	6500
Electricity Demand (Power/Current)	Power requirement	KVA	25

※As we are constantly improving our products, We reserve the right to change the design, specifications and configuration at any time without notice.

You are welcome, Check for changes in specifications, When you visit us!

VMC1170L

(Mitsubishi M80B+BT40 Spindle+24T Tool Manipulator) Model Optional Configurations (for an additional fee)

serial number	Accessory Name	Product Model	quantity	note
1	̈Equipped with 5-axis (Turbine Worm Gearbox)	FAR210 Engine Housing + drive	1 set
2	̈Equipped with 5-axis (Turbine Worm Gearbox)	FHR255 Engine Housing + drive	1 set
3	̈Equipped with 5-axis (Turbine Worm Gearbox)	FHR320 Engine Housing + drive	1 set
4	• Equipped with 5-axis (Harmonious) Transmissions	JS210 Engine Housing + drive	1 set
5	• Equipped with 5-axis (Harmonious) Transmissions	JS255 Engine Housing + drive	1 set
6	• Can be equipped with an additional four-axis device (corps)	AR210 Enclosure, drive + engine	1 set
7	- Optionally equipped with four axles (corps + Disk headstock)	AR210 Enclosure, drive + engine, Headstock RTA210, L-Block, Bridge Slab	1 set
8	• Can be equipped with a 4-axis system (corps + Upper tailstock)	AR210 Enclosure, drive + engine, tailstock TJ210, Chuck flange	1 set
9	• Can be equipped with an additional four-axis device (corps)	HR255 Housing, drive + engine	1 set
10	- Optionally equipped with four axles (corps + Disk headstock)	HR255 Housing, drive + engine, Headstock RTH255, L-Block, Bridge Slab	1 set
11	• Can be equipped with a 4-axis system (corps + Upper tailstock)	HR255 Housing, Drive + Motor, tailstock TJ210, Chuck flange	1 set
12	• Can be equipped with an additional four-axis device (corps)	HR320 Housing, drive + engine	1 set
13	- Optionally equipped with four axles (corps + Disk headstock)	HR320 Housing, drive + engine, Headstock RTH320, L-Block, Bridge Slab	1 set
14	• Can be equipped with a 4-axis system (corps + Upper tailstock)	HR320 Housing, Drive + Motor, tailstock TJ320, Chuck flange	1 set
15	̈For installation of flat jaw pliers	6unit of length	1
16	̈Optional Refractometer	Manual 0-60	1
17	̈ Extra knife wrench	C32-specific	1 pen
18	̈Optional tool holder	BT40 with tool holder with chuck lock	1
19	Precision Milling Heads	BT40-C32-105 (with compartment)	1
20	Optional Precision Spring Clamps	C32 3/4/6/8/10/12/16	1 piece
21	Optional USB Flash Drive		1
22	Optional Combination Shaft	M16 Composite Platoon	1 set
23	Optional chip chain conveyor		1 set
24	̈ Optional BT50-155-8000 Belt Spindle	BT50+24T Tool Magazine, spindle drive SJ-D15/08-01	1 set