VMC1370L-Vertical machining center (Two lines and one rigid)

VMC1370L (Mitsubishi M80B System + прямое подключение шпинделя BT40-150-12000 об/мин + инструментальный магазин на 24-тонный рычаг)

Технические параметры/Technical Parameters

Model Number	model	unit (Measurement)（unit)
Distance traveled/Travel
Moving on the X-axis	X-axis travel	mm	1300
Moving on the Y-axis	Y-axis travel	mm	700
Moving on the Z axis	Z-axis travel	mm	700
Distance from spindle face to table surface	Distance from guide plane to spindle center	mm	170-870
Расстояние от центра шпинделя до направляющей поверхности колонны	Distance from spindle center to column guide surface	mm	730
Worktable/Worktable
Table size	Worktable size（L×W）	mm	1400*700
T-slot	T-slot	mm	5-18-130
Maximum load capacity	Maximum load	kg	1400
Main Axis (In Mechanics, Optics, botany, etc.)/Spindle
Spindle speed	Spindle Speed	.rpm	12000
Spindle power	Spindle motor power	KW	11
Tapered spindle bore	Spindle taper hole		BT40
Spindle Bushing Outer Diameter	Outside diameter of spindle sleeve	mm	φ150
Spindle collets	Spindle collet chuck		C32
Attenuation Method	Unlock tool way		Нож пневматического усилительного цилиндра
Магазин для инструментов типа рукоятки ножа/Tool magazine
Tool magazine capacity	Tool magazine Capacity	T	24
Feed Rate/Federate
Express movement on the X/Y/Z axes	Ted X/Y/Z axis express displacement	mm/min	24000/24000/16000
Cutting Feed Rate	Cutting feed rate	mm/min	8000
Accuracy
Position Accuracy	Pointing accuracy	mm	±0.003/300
Repositioning Accuracy	Repeat ability accuracy	mm	±0.002/300
Machine information
Machine Dimensions	Machine dimension (L×W×H)	mm	400034003400
Machine Weight	Machine weight	kg	8500
Electricity Demand (Power/Current)	Power requirement	KVA	25

※As we are constantly improving our products, We reserve the right to change the design, specifications and configuration at any time without notice.

You are welcome, Check for changes in specifications, When you visit us!

Модель VMC1370L (Mitsubishi M80B + шпиндель BT50 ременного типа + 24T lever type tool changer) Optional Configurations (for an additional fee)

serial number	Accessory Name	Product Model	quantity	note
1	̈Equipped with 5-axis (Turbine Worm Gearbox)	FHR255 Engine Housing + drive	1 set
2	̈Equipped with 5-axis (Turbine Worm Gearbox)	FHR320 Engine Housing + drive	1 set
3	̈Equipped with 5-axis (Turbine Worm Gearbox)	Кузов FHR400 двигатель + drive	1 set
4	¨Оборудован пятью осями (гармоничные передачи)	JS255 Engine Housing + drive	1 set
5	• Can be equipped with an additional four-axis device (corps)	HR255 Housing, drive + engine	1 set
6	̈Optionally can be equipped with four axes (corps + Disk headstock)	HR255 Housing, drive + engine, Headstock RTH255, L-Block, Bridge Slab	1 set
7	• Can be equipped with a 4-axis system (corps + Upper tailstock)	HR255 Housing, Drive + Motor, tailstock TJ210, Chuck flange	1 set
8	• Can be equipped with an additional four-axis device (corps)	HR320 Housing, drive + engine	1 set
9	̈Optionally can be equipped with four axes (corps + Disk headstock)	HR320 Housing, drive + engine, Headstock RTH320, L-Block, Bridge Slab	1 set
10	• Can be equipped with a 4-axis system (corps + Upper tailstock)	HR320 Housing, Drive + Motor, tailstock TJ320, Chuck flange	1 set
11	• Can be equipped with an additional four-axis device (corps)	Кузов HR400, drive + engine	1 set
12	̈Optionally can be equipped with four axes (corps + Disk headstock)	Корпус HR400, drive + engine, дисковая бабка RTH400, L-Block, Bridge Slab	1 set
13	• Can be equipped with a 4-axis system (corps + Upper tailstock)	HR320 Housing, Drive + Motor, хвостовая бабка TJ400, Chuck flange	1 set
14	̈For installation of flat jaw pliers	6unit of length	1 piece
15	̈Optional Refractometer	Manual 0-60	1 piece
16	̈ Extra knife wrench	C42-специфический	1 pen
17	Дополнительный держатель инструмента	BT50 с держателем инструмента с фиксацией патрона	1 piece
18	Precision Milling Heads	BT50-C42-110 (with compartment)	1 piece
19	Optional Precision Spring Clamps	C42 6/8/10/12/16/20	1 piece
20	Optional USB Flash Drive		1 piece
21	Optional Combination Shaft	M16 Composite Platoon	1 set
22	Optional chip chain conveyor		1 set
23	Дополнительный двухшнековый транспортер стружки		1 set
24	¨ Опциональный тип шпинделя BT50-190-8000		1 piece