VMC1480L-Vertical machining center (Two lines and one rigid)

VMC1480L (Mitsubishi M80B + ременной шпиндель BT50 + lever tool changer 24T)

Technical Parameters

Model Number	model	unit (Measurement)/（unit)
Distance traveled/Travel
Moving on the X-axis	X-axis travel	mm	1400
Y-axis travel	Y-axis travel	mm	800
Moving on the Z axis	Z-axis travel	mm	700
Distance from spindle face to table surface	Distance from guide plane to spindle center	mm	160-860
Distance from spindle centerline to guide column	Distance from spindle center to column rail	mm	872.5
Worktable/Worktable
Table size	Worktable size (L×W)	mm	1500×800
Maximum load capacity	Maximum load	kg	1400
T-slot	T-slot	mm	5-18-150
Main Axis (In Mechanics, Optics, botany, etc.)/Spindle
Spindle speed	Spindle Speed	.rpm	8000
Spindle power	Spindle motor power	KW	18.5
Tapered spindle bore	Spindle taper hole		BT50-φ155
Spindle collets	Spindle collet chuck		C42
Attenuation Method	Unlock tool way		Нож пневматического усилительного цилиндра
Tool changer type “Lever/Tool magazine
Tool magazine capacity	Tool magazine Capacity	T	24
Feed Rate/Federate
Express movement on the X/Y/Z axes	Ted X/Y/Z axis express displacement	mm/min	20000/20000/16000
Cutting Feed Rate	Cutting feed rate	mm/min	10000
Accuracy
Position Accuracy	Pointing accuracy	mm	±0.003/300
Repositioning Accuracy	Repeat ability accuracy	mm	±0.002/300
Machine information
Machine Dimensions	Machine dimension (L×W×H)	mm	410032003400
Machine Weight	Machine weight	kg	10500
Electricity Demand (Power/Current)	Power requirement	KVA	35

※As we are constantly improving our products, We reserve the right to change the design, specifications and configuration at any time without notice.

You are welcome, Check for changes in specifications, When you visit us!

VMC1480L (Mitsubishi M80B + шпиндель BT50 ременного типа + 24T lever type tool changer) опциональные конфигурации модели (Additional Cost)

serial number	Accessory Name	Product Model	quantity	note
1	̈Equipped with 5-axis (Turbine Worm Gearbox)	FHR255 Engine Housing + drive	1set
2	̈Equipped with 5-axis (Turbine Worm Gearbox)	FHR320 Engine Housing + drive	1set
3	̈Equipped with 5-axis (Turbine Worm Gearbox)	Кузов FHR400 двигатель + drive	1set
4	• Equipped with 5-axis (Harmonious) Transmissions	JS255 Engine Housing + drive	1set
5	• Can be equipped with an additional four-axis device (corps)	HR255 Housing, drive + engine	1set
6	- Optionally equipped with four axles (corps + Disk headstock)	HR255 Housing, drive + engine, Headstock RTH255, L-Block, Bridge Slab	1set
7	• Can be equipped with a 4-axis system (corps + Upper tailstock)	HR255 Housing, Drive + Motor, tailstock TJ210, Chuck flange	1set
8	• Can be equipped with an additional four-axis device (corps)	HR320 Housing, drive + engine	1set
9	- Optionally equipped with four axles (corps + Disk headstock)	HR320 Housing, drive + engine, Headstock RTH320, L-Block, Bridge Slab	1set
10	• Can be equipped with a 4-axis system (corps + Upper tailstock)	HR320 Housing, Drive + Motor, tailstock TJ320, Chuck flange	1set
11	• Can be equipped with an additional four-axis device (corps)	Кузов HR400, drive + engine	1set
12	- Optionally equipped with four axles (corps + Disk headstock)	Корпус HR400, drive + engine, дисковая бабка RTH400, L-Block, Bridge Slab	1set
13	• Can be equipped with a 4-axis system (corps + Upper tailstock)	HR320 Housing, Drive + Motor, хвостовая бабка TJ400, Chuck flange	1set
14	̈For installation of flat jaw pliers	6unit of length	1 piece
15	̈Optional Refractometer	Manual 0-60	1 piece
16	¨Опциональный ножевой ключ	C42-специфический	1 pen
17	Дополнительный держатель инструмента	BT50 с держателем инструмента с фиксацией патрона	1 piece
18	Precision Milling Heads	BT50-C42-110(with the bay)	1 piece
19	Optional Precision Spring Clamps	C42 6/8/10/12/16/20	1 piece
20	Optional USB Flash Drive		1 piece
21	Optional Combination Shaft	M16 Composite Platoon	1set
22	Optional chip chain conveyor		1set
23	Дополнительный двухшнековый транспортер стружки		1set
24	¨ Опциональный тип шпинделя BT50-190-8000