VMC850L-Vertical machining center (Two lines and one rigid)

VMC-850L (Mitsubishi M80A+шпиндель с ремнем типа BT40+инструментальный манипулятор типа 24T)

Technical Parameters

Model Number	model	unit (Measurement)/（unit)
Distance traveled/Travel
Moving on the X-axis	X-axis travel	mm	800
Moving on the Y-axis	Y-axis travel	mm	500
Moving on the Z axis	Z-axis travel	mm	500
Distance from spindle face to table surface	Distance from guide plane to spindle center	mm	110-610
Distance from spindle centerline to guide column	Distance from spindle center to column rail	mm	560
Worktable/Worktable
Table size	Worktable size (L×W)	mm	1000×500
Maximum load capacity	Maximum load	kg	450
T-slot	T-slot	mm	5-18-90
Main Axis (In Mechanics, Optics, botany, etc.)/Spindle
Spindle speed	Spindle Speed	.rpm	8000
Spindle power	Spindle motor power	KW	7.5
Tapered spindle bore	Spindle taper hole		BT40-φ150
Spindle spring yellow collet	Spindle collet chuck		C32
Attenuation Method	Unlock tool way		давление масла
Магазин для инструментов типа рукоятки ножа/Tool magazine
Tool magazine capacity	Tool magazine Capacity	T	24
Feed Rate/Federate
Express movement on the X/Y/Z axes	Ted X/Y/Z axis express displacement	mm/min	24000/24000/18000
Cutting Feed Rate	Cutting feed rate	mm/min	10000
Accuracy
Position Accuracy	Pointing accuracy	mm	±0.003/300
Repositioning Accuracy	Repeat ability accuracy	mm	±0.002/300
Machine information
Machine Dimensions	Machine dimension (L×W×H)	mm	270028002700
Machine Weight	Machine weight	kg	5500
Electricity Demand (Power/Current)	Power requirement	KVA	18

※As we are constantly improving our products, We reserve the right to change the design, specifications and configuration at any time without notice.

You are welcome, Check for changes in specifications, When you visit us!

Опциональная конфигурация модели (for an additional fee)

порядковый номер	Accessory Name	Product Model	quantity	Comments
1	̈Must be equipped 5 Axes (turbine worm)	Housing Motor FAR210 + drive	1 set
2	̈Must be equipped 5 Axes (turbine worm)	Housing FHR255 Motor + drive	1 set
3	̈Must be equipped 5 Axes (turbine worm)	Housing FHR320 Motor + drive	1 set
4	̈Must be equipped with five axles (harmonic gears)	Housing JS210 Motor + drive	1 set
5	̈Must be equipped with five axles (harmonic gears)	Housing JS255 Motor + drive	1 set
6	̈Four-axis (corps) Optional	AR210 Enclosure, drive + motor	1 set
7	̈ Four-axis (body + Disc tailstock) Should be optional	AR210 Body, drive + motor, disc tailstock RTA210, Block L, bridge	1 set
8	̈ Should choose a four-axis (body + central tailstock)	AR210 Enclosure, drive + motor, TJ210 center tailstock, Chuck flange	1 set
9	̈Four-axis (corps) Optional	HR255 Housing, drive + motor	1 set
10	̈ Four-axis (body + Disc tailstock) Should be optional	HR255 Body, drive + motor, disc tailstock RTH255, Block L, Bridge Plate	1 set
11	̈ Should choose a four-axis (body + central tailstock)	HR255 Housing, drive + engine, TJ210 center tailstock, Chuck flange	1 set
12	̈Flat nose pliers are optional	6 Inches	1 state
13	̈Should choose a refractometer	Portable 0-60	1 state
14	̈ The key for the locking knife should be optional	Посвящается C32	1 handful
15	̈ Tool holder for locking should be selected	BT40 с зажимным замком для держателя инструмента	1 state
16	̈ Precision cutting head should be selected	BT40-C32-105(带卡位)	1 state
17	̈ Precision spring clamp should be chosen	S32 3/4/6/8/10/12/16	Along 1
18	̈ U-shaped disk should be optional		1 state
19	̈ Combination plate should be optional	M16 Composite Board	1 set
20	̈Chain chip conveyor should be optional		1 set